In the Greater Northwest St Louis Area, Goldkamp Heating & Cooling is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Goldkamp Heating & Cooling because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace Repair and Air Conditioner Repair in Kirkwood MO in Florissant MO. Call us today at (314) 839-3332!Your Best Choice for Furnace Repair and Air Conditioner Repair in Kirkwood MO
Clean and check Lennox 13 SEER AC. I hosed out the condensing coils and cleaned electrostatic filter. The drain hose for condensation needed to be cleared. This is for yearly maintenance.
Checking Trane air conditioner and furnace. Unit needs two 16 x 25 x 5 filters. Units are working properly upon departure.
Checking Trane air conditioner and furnace. Unit needs two 16 x 25 x 5 filters. Units are working properly upon departure.
Restoration and contractor work. Measuring for a new hanging heater for the warehouse of this location.
Restoration and contractor work. At this location to deliver registers needed to complete the job. I am also here to measure for the installation of duct work.
Annual winter maintenance on air handler. Checked Trane electric air handler for proper heat in attic. I had to rewire low-voltage and found the humidifier leaking on Trane furnace in the basement. I adjusted hoses to prevent problem in the future. Unit is working properly upon departure.
No heat service call. Found the Carrier furnace door switch open so I closed it. I cleaned the flame sensor and checked the system. Unit is working properly upon departure.
Restoration contractor work. At this location to coordinate with the carpenter regarding the installation process. We will be replacing the existing duct work with our customized duct work.
At this location to assist the installers that are finishing duct work placement.
Remodel installation call. Meeting the plumber and carpenter to discuss how the duct work will be installed.
Residential contractor work. We are here to assist with the home remodel. Currently we are deciding where the new duct work for the high efficiency heating and cooling system will be placed through the foundation wall.
Installation service call. At this location to measure for the installation of a Trane high efficiency variable speed furnace. We are here to locate where we are going to cut holes for the new system. The installation is going to need new duct work as well.
Installing a capacitor a trane air conditioner. I checked the Honeywell filters and furnaces. I cleared the drains lines and the system is operating properly upon departure.
Installing capacitor on a trane air conditioner. Checked Honeywell filters and furnaces. I cleared the drains and now the system is working properly.
Fire stopping at this job.
Installing duct work at this job location.