Looking for a Certified Heating & AC Contractor in the Greater St. Louis, Missouri Area?
CALL (314) 839-3332
Chesterfield MO
Since 1998, Goldkamp Heating & Cooling is your best choice for repair, installation, and service in homes and buildings just like yours in the Greater Northwest St Louis Area. We take special pride in the craftsmen we train and employ--a fact you'll see in the reviews below. It's also noticeable immediately in the attitude and integrity our technicians bring to your job site. Our entire company works hard to make your experience with us hassle-free and enjoyable. You can also be assured that Goldkamp Heating & Cooling stands behind the work we do as well as complies with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace Repair and Air Conditioner Repair in Chesterfield MO. Call us today at (314) 839-3332!Your best choice for Furnace Repair and Air Conditioner Repair in Chesterfield MO
Local Reviews
for Chesterfield, MO
Powered by Nearby NowAlways Great Service
Anne - Chesterfield, MO
Matt is always thorough and provides quality service. This was a routine AC check, but I can be sure that if anything is needed, he will identify it, and he will not ever recommend unnecessary work be done.
AC doesn't work
Margie - Chesterfield, MO
From the office staff to the owner (and everyone in between) this is by far the BEST company I have ever dealt with....honest, efficient, hardworking, and friendly. I cannot say enough nice things about them. I have recommended them to anyone I know who needs heating/cooling service and have had a friend get a new AC from them!! I will continue to refer customers.
Patrick L.
Restoration and contractor work. At this location to measure for the installation of customized duct work and a new Goodman HVAC system.
Patrick L.
Residential installation. At this home to inspect the newly installed Trane system that we put in last week. Unit appears to be working fantastic upon departure.
Patrick L.
Residential installation. At this home to measure for a new Goodman HVAC system that we are going to install this week. We are also modifying the existing duct work with customized pieces.
Matt G.
Annual furnace maintenance. Checked furnace for a frozen exhaust pipe. I cleared the system pipe and determined it needed to be rerouted to prevent it from happening again.
Matt G.
Winter clean and check. Inspected furnace to ensure efficiency during the winter months. Took a look at the humidifier and found that I needed to replace the humidifier pad.
Patrick L.
Installation service call. At this location to install a combustion relief to the furnace room area.
Matt G.
Inspection of an air conditioner to determine if it was struck by lightning. System had a bad circuit board on the Armstrong furnace. Getting in touch with the insurance company to detail my findings.
Matt G.
Air conditioner service call. Customer was complaining of humidity due to faulty duct work. Checked the suspected area and found a negative pressure issue. Doing further research into the problem and will return with the solution.
Matt G.
AC service call. Checked system and discovered the smell of a dead animal inside duct work. I did not find anything with an Emerald furnace or air conditioner. The system is working properly.
Patrick L.
At this home to give an estimate for moving some duct work for this remodeling contractor. House is getting some remodeling done this summer.
Matt G.
Performing yearly maintenance on a new Trane air conditioner. I checked the air pressures, cleaned the coils, inspected air drop temperature. System appears to be working properly upon departure.
Patrick L.
Measuring for a complete system installation. Trane equipment will be installed.
Patrick L.
Measuring for a complete HVAC installation. We will be installing Trane equipment.
Matt G.
Air conditioner service call. I had to remove a stick from condenser fan motor blade and performed maintenance on the Trane unit in preparation for the summer months. System is operating properly at this time.
Patrick L.
Measuring for new duct work and returns/supplies in the attic.
Patrick L.
Delivering duct work to job.
Patrick L.
Delivering duct work for installation.
Patrick L.
Upgrading the furnace to a high efficiency 95% gas furnace.
Patrick L.
Measuring for a furnace and air conditioner installation.
Patrick L.
Meeting the fire marshall to check for proper flashing and ensure it is up to code.
Patrick L.
Installing a new high efficiency furnace and reconnecting combustion air relief pipes.
Patrick L.
Delivering duct work and measuring for a new full system installation.
Patrick L.
Measuring for duck work before the floors get poured
Patrick L.
Measuring duct work to be installed
Patrick L.
Measuring for a new furnace and coil installation
